Our Race Result Scoreboard Sheets are made from durable 10 mil. polyethylene, and is printed with weatherproof UV resistant ink. The shaded lines make it easier to read your results and the design allows for up to 120 racers. 
 
'fish-tail' carbide tips allow for the most efficient ice &
hard-pack snow boring
 

24 in. soft, polyurethane tubes in bright red or blue that easily bend and flex away from the skier upon impact.
The FLEX-EEZ are soft enough and flex easy enough that shinguards are not needed. 		FLEX-EEZ are ideal for ski schools, mitey-mite and J4, J5 & J6 junior teams & programs. FLEX-EEZ are also ideal for slalom drill work w/ older ski racers. Junior races can also be held w/ using FLEX-EEZ. FLEX-EEZ provide a light, low-cost, durable and effective alternative to hinged 'stubby' gates. FLEX-EEZ are available in our Standard base w/ threads or our Oversize screw-in base. The Standard base is the best 'stick-in' type base available and retains in the snow much better than other 'stick-in' bases due to our threaded & larger diameter base design. It can be 'hand-turned' into the snow & holds very well in most snow conditions. The Oversize screw-in base is the best retaining base available & requires a gate wrench. It is best for older top-end racers & very soft snow conditions.

Powder-coated, universal, heavy duty wrench can be used to either screw in gates or pound in wedges.

 


eliminate unsafe pole holes & the need for additional. start maintenance. Power Pads provide each racer with a fair & consistent start. PowerPads breakdown for safely carrying in a backpack

27 mm Impact-modified polycarbonate shaft: costs less and is a more durable replacement shaft for most other brands.  Our shafts are made w/ compounds that better resist cracking, splitting and breaking upon racer contact & snow surface impact.

   
Competition Hinge: Improved, more elastic & durable polyurethane tendon elastomer.
The 5 ring design provides a more even flex with a larger bend and
is more protected and durable. 		 
Oversize Screw-In Base: now made w/ more forgiving, durable and high impact material. Same great base design w/ a larger diameter core with less taper & larger threads than most other brands.

This means a larger
surface area for better gate retention in the snow.

'Brush' Markers / Gates:

  • Thicker, more full brush filaments with a better retaining base.
  • Great for softer snow and can be cut for lesser snow depth conditions.
  • Available in bright Red or Blue.


H.D. Aluminum Wrench:

  • Made from aluminum tubing with thicker walls.
  • Features larger handles.
  • Able to withstand heavier use.
  • Lighter in weight.
  • Lower price.
  • Universal use with most other gate brands.

New shaft-to-hinge adaptor greatly improves the durability & use of 27 mm shafts with the Competition or standard Hinge.

Top Caps:

New, better fitting and retaining molded caps made of high impact material for our 27 mm shafts & gates.
Check here for base and along with snow
Page provided by FREE GoFTP Client